品牌 | 中矿重装 | 产地 | 江苏海安 |
材质 | 加厚钢材 | 用途 | 堆取料 |
尺寸 | 可定制 |
悬臂斗轮取料机是钢厂、电厂、码头等企业原料场物料均化设备。我司目前具有取料能力600t/h~3000t/h各种规格。悬臂斗轮取料机由斗轮机构、上部金属结构、变幅机构、回转机构、走行机构、电气室、司机室电气控制系统等组成。
工作时,主机行走至将要取料料堆位置,地面出料皮带启动运行后,悬臂皮带机启动运行。随后斗轮机构及回转机构运行开始取料,变幅机构配合取料作周期性动作。取料作业可分为定点取料和同层平移取料二种方法。
Bucket wheel boom reclaimer is the mix the uniform equipment and used in the steel mill,power plant, wharfz disperses a grain of material, at present we have take material ability 600t/h-3000t/h each kind of specification. The bracket bucket, wheel reclaimer consists of the bucket, wheel organization, upside the metal structure. the amplitude organization, the swiveling mechanism, walks the good organization, the electric panel room, the cab electric control system and so on.
When working,the main engine walks to is going to take the material material to pile the position, after the ground leaves the material leather belt starts the movement, the bracket belt fastener starts the movement. Afterward the bucket-wheel organization and the swiveling mechanism movement starts to take the material, the amplitude organization matches the conjunction material to make the periodic movement. Takes the material work to be possible to divide Into the fixed point to take the material and to take the material two methods with the level,translation.
技术参数表|Technical Date
性能参数名称 | 单位 | LDQ1600 2400/35 | LDQK600 1000/25 | LDQZ800 1200/37.5 | LDQK1100 1200/25 | LDQZ1200 1600/40 | LDQK1250 2000/30 | LDQK1500 1500/45 | LDQK1600 2500/30 | LDQZ2500 7500/55 | |
生产能力 | 堆料 取料 | t/h t/h | 2400 1600 | 1000 600 | 1200 800 | 1200 1100 | 1600 1200 | 2000 1250 | 1500 1500 | 2500 1600 | 7500 2500 |
堆取高度 | 轨上 轨下 | m m | 12 2 | 10 1 | 12 1 | 11 1 | 11 1 | 12 1.5 | 12 2 | 12 1.5 | 12 2 |
物料特性 | 堆比重粒度 | t/h3 mm | 2.2 <100 | 1.6-3.0 <100 | 0.5-2.2 <100 | 0.5-2.5 <100 | 2.2 <100 | 1.8-2.4 <100 | 2.2 <100 | 0.8-1 <100 | 2.2 <100 |
回转机构 | 回转半径回转角度 | m ()° | 35 ±110 | 25 ±110 | 37.5 ±110 | 25 ±110 | 40 ±110 | 30 ±110 | 45 ±110 | 30 ±110 | 55 ±110 |
前臂皮带机 | 带宽 带速 | mm m/s | 1400 3.15 | 1000 2.5 | 1200 2 | 1200 2 | 1200 1.6 | 1200 2.5 | 1000 2.5 | 1600 3.15 | 1800 3.15 |
轨距最大轮压调车速度工作速度荐用钢轨 | M Kn m/min m/min kq/m | 8 268 30 7 P50 | 6 250 30 5 P50 | 6 230 30 7 P50 | 6 250 30 7 P50 | 8 250 30 7 P50 | 7 250 30 7 P50 | 8 250 30 7 P50 | 7 250 30 7 P50 | 9 250 30 7 P50 | |
装机总容量 | 总功率 | kw | 472 | 222 | 285 | 220 | 380 | 300 | 320 | 330 | 690 |
常用功率 | kw | 440 | 148 | 220 | 160 | 330 | 220 | 300 | 280 | 670 | |
电源 | 电压 | V | 10000 | 380 | 6000 | 6000 | 6000 | 10000 | 6000 | 10000 | 10000 |
供电方 | V | 动力电缆卷筒滑线 | |||||||||
控制方式 | 通讯电缆卷筒无线 |
- 江苏中矿重型装备有限公司
- 袁晓宇
- 18962762652
- 南通市海安经济开发区白甸节能环保产业园兴甸路29号
-
废钢输送机
¥电议
-
圆管带式输送机
¥电议
-
长距离曲线带式输送机
¥电议
-
移动皮带机
¥电议
-
港口移动式无尘料斗
¥电议
- 联系姓名: 袁晓宇
- 电话号码: 18962762652
- 经营模式:生产厂家
- 企业勋章:
- 所在地区:江苏-南通-海安
- 主营产品:环境保护专用设备、水泥机械、港口装卸设备等